Aaeon UP-CHT01 - Driver Download and Installation Steps

Chapter 3 – AMI BIOS Setup 17
Maker Board UP-CHT01
3.1 Driver Download and Installation
Step 1
–
Download the drivers
1. Click
Driver
tab in the Downloads section of UP page of AAEON website at:
http://www.aaeon.com/en/p/up-board-computer-board-for-professional-
makers#downloads
2. Download the
Step 1 - Chipset and peripherals Driver, Step 2 - TXE Driver,
Step 3 - LAN Driver
and
Step 4- Dummy driver (Manual)
and open the
self-extracting EXE files.
3. Assign a destination folder and click
Install.
4. The driver folders will be extracted to the destination folder.
Step 2 – Install Chipset and peripherals Driver
1. Open the
Step1 - Chipset and peripherals
folder
2. Open the subfolder based on you OS
3. Open the
Setup.exe
file in the folder
4. Follow the instructions
5. Drivers will be installed automatically
Step 2 – Install TXE Driver
1. Open the
Step2 - TXE
folder
2. Open the subfolder based on you OS
3. Open the
SetupTXE.exe
file in the folder
4. Follow the instructions
5. Drivers will be installed automatically
Step 3 – Install LAN Driver
1. Open the
Step3 - LAN
folder
2. Open the subfolder based on you OS