22
7-2 Self Check Function
This function self-checks the internal performance of the balance.
Operation
1 Press and hold the MODE key until RESPONSE is
displayed, then release the key.
2 The balance automatically starts to check its internal
performance
3 After self-check, the balance displays the checking
result and returns to the weighing mode.
e.g. “ OK ”
The example above indicates that the result of the self
check is good.
Note
If improper performance is found in the self check, the
balance displays CH no. Contact the local A&D dealer
for repair.
Press and hold
the key
Release the key
Displays the result.
To Next Page
Loading...
