Milan / Paylink System Manual Issue 1.5 29 January 2020
CONFIDENTIAL
Not to be disclosed without prior written permission from Aardvark Embedded Solutions Ltd
Page 23 of 71
Read out of Dispenser Details (1.11.x)
Different protocols / manufacturers provide different details on acceptors. For almost all recyclers the
details are copied from the acceptor field.
The Description (Dispenser.Description) field is generated as follows:
The replies to:
• Request Software Revision (241) &
• Request Product Code (244) commands, separated by ‘~’ characters.
Each individual field is truncated to 15 characters, and is omitted if there is no
response to the command, although the ‘~’ character is still inserted.
The 12 character firmware revision, followed a ‘~’ followed by the 32 character device
information.
The phsyicalCashUnit name.
The Dispenser.SerialNumber field is generated as follows:
The binary reply to the ID Serial No (242) command.
To Next Page
Loading...