8 Model 53i IP Phone Installation Guide
Installation and Setup
Shared Network Connection
To connect a network device (such as a computer) to the phone, connect an
Ethernet Cable into the network port on the top of the phone marked with
PC. Plug the other end of the Ethernet cable into the network jack on the
network device you are sharing the network connection with.
Note: The PC jack on the 53i does not supply inline power onto other network
devices. All Ethernet cables used must be minimum category 5/5e straight-
through cables, such as the cable provided with your phone.
Ethernet
Cables
Other Network Devices
Network Jack
(if Inline power provided,
do not install the power adapter)
Power
Adapter
To Network
To Other
Network Device
Power Adapter
Connection
To Next Page
Loading...
