8 Model 57i IP Phone User Guide
Getting Started
Idle Screen
When the phone has successfully updated the configuration and connected
to the network, the phone displays the Idle State screen. The idle screen is
shown whenever your phone is not in use.
Note: Your system administrator sets up your SIP screen name, line number, and
any other administrative features required. If your name does not display on
the screen, contact your system administrator.
The Idle State screen lists your name (SIP screen name) and day, date, and
time. In the above screen, the "L1" indicates John Smith is configured on
Line 1.
The idle screen also displays the following default softkeys located on the
top left and top right of the screen:
•Services
•Directory
• Callers List
•Intercom
When you lift the handset, the screen displays the default bottom softkeys
of:
•Dial
•Conference
• Transfer.
You can configure the 6 top softkeys and the 6 bottom softkeys as required.
Services
Dir
Callers
Icom
L1
John Smith
Sat Jan 1 12:18am
Services
Dir
Callers
Icom
L1
John Smith
Dial
Conf
Xfer
>
To Next Page
Loading...
