44 Model 57i IP Phone User Guide
Softkeys
Softkeys as Flash Key
You can set a softkey to generate a flash event when it is pressed on the 57i
or 57i handset. You do this by setting the softkey to "flash". The IP phone
generates flash events only when a call is connected and there is an active
RTP stream (for example, when the call is not on hold).
Setting a Flash Softkey
1. Click on Operation->Softkeys and XML.
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select "Flash".
5. In the "Label" field, enter a label to display on the phone for the softkey.
6. Click to save your changes.
7. Click on Operation->Reset.
8. In the "Restart Phone" field click to restart the IP phone.
Aastra Web UI
To Next Page
Loading...
