48 Model 57i IP Phone User Guide
Softkeys
Configuring Park /Pickup using Static Configuration
Use the following procedure to configure the Park/Pickup call feature
using the static configuration method.
Note: Aastra recommends you configure either the static or the programmable con-
figuration, but not both.
1. Click on Basic Settings->Preferences->General.
2. Enter a server value in the Park Call field to which incoming live calls
will be parked.
Note: For values to enter in this field, see the table "Park/Pickup Call Server Config-
uration Values" on page 47.
Aastra Web UI
To Next Page
Loading...
