52 Model 6730i IP Phone User Guide
Line Keys and Programmable Keys
Line Key
You can set a programmable key to act as a line/call appearance key on the 6730i. The key acts
as a line that behaves the same as a hard line key (L1 and L2). For more information about the
behavior of line keys, see “Multiple Line and Call Appearance Keys” on page 49.
You use the Aastra Web UI to set a Line key.
Configuring a Line Key
Use the following procedure to set a Line key on your phone.
1. Click on Operation->Programmable Keys.
2. Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by
your system administrator.)
3. In the "Type" field, select Line to apply to the key.
4. In the "Line" field, select a line for which to apply this key. Valid values are 3 through 6.
5. Click Save Settings.
Aastra Web UI
Note: Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY
by your System Administrator.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
