Model 6730i IP Phone User Guide 61
Line Keys and Programmable Keys
5. Edit the speed dial information as applicable and press SAVE.
Editing a Speed Dial on a Programmable Key
1. Click on Operation->Programmable Keys..
2. Select the key configured for speed dial.
3. In the "Value" field, edit the phone number, extension, or speed dial prefix to apply to this
hard key. If you enter a speed dial prefix, you must enter the "+" character at the end of the
prefix number (for example, "123456+").
4. If required in the "Line" field, select a line for which to apply the speed dial to. Valid values
are 1 through 6.
5. Click Save Settings.
Notes:
1. You can cancel out of the speed dial editing process at any time without
saving, by pressing the key.
2. You can also use the (up arrow) key to cancel when in Extension editing or the
3 (left arrow) key to cancel if in Line editing. Pressing either of these keys
displays the idle screen.
On the 6730i, you can remove the Speed Dial Key by erasing the speed dial
number digits (leaving the speed dial value blank) and then press SAVE or the
(right arrow) key. Use the left arrow key to delete the digits.
Aastra Web UI
Note: You can delete a speed dial key by removing the information from the
"Value" field.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
