118 Model 6755i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
Using the Park Call/Pickup Parked Call Feature
Use the following procedure on the IP phones to park a call and pick up a parked call.
Park a Call
1. While on a live call, press the "Park" key.
2. Perform the following for your specific server:
If the call is parked successfully, the response is either a greeting voice confirming that the call
was parked, or a hang up occurs. The parked call party hears music on hold.
3. If the call fails, you can pick up the call (using the next procedure) and press the "Park" key
again to retry step 2.
Pickup a Parked Call
1. Pick up the handset on the phone.
2. Enter the extension number where the call was parked.
3. Press the "Pickup" key.
If the call pick up is successful, you are connected with the parked call.
For Asterisk Server
Server announces the extension
number where the call has been
parked. Once the call is parked,
press the y key to
complete parking.
For BroadWorks Server
After you hear the greeting from
the CallPark server, enter the
extension where you want to
park the call.
For Sylantro Server
Enter the extension number
where you want to park the call,
followed by "#" key.
For ININ Server
Enter the extension number
where you want to park the call,
followed by "#" key.
To Next Page
Loading...
