Model 6755i IP Phone User Guide 149
Line Keys, Programmable Keys, and Softkeys
Empty Key
You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this
by setting the softkey to "empty". The keys are added in order (from key 1 to key 20) after any
hard-coded keys have been added. If a particular key is not defined, it is ignored.
Configuring an Empty Key
Use the following procedure to configure an Empty softkey on the 6755i phone.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Empty.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
Aastra Web UI
To Next Page
Loading...
