Aastra 6755i - Making Calls; Dialing a Number

144 Model 6755i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Paging.
4. In the “Label” field, enter a label to apply to this key.
5. In the “Value” field, enter a multicast IP address and a port number for the Paging key.
When you press this key, the phone initiates an outgoing multicast RTP session to the
specified address using the specified port. (For example, 239.0.1.15:10000).
6. To receive RTP steams for Group Paging, you must also configure the "Paging Listen
Addresses" parameter at the path, Basic Settings->Preferences->Group Paging RTP
Settings. For more information about setting this parameter, see “Group RTP Paging
(receives RTP streams)” on page 235.
Programmable Keys
7. Select from "Key 1" through "Key 6"
8. In the "Type" field, select Paging.
9. In the “Value” field, enter a multicast IP address and a port number for the Paging key.
When you press this key, the phone initiates an outgoing multicast RTP session to the
specified address using the specified port. (For example, 239.0.1.15:10000).
10. To receive RTP steams for Group Paging, you must also configure the "Paging Listen
Addresses" parameter at the path, Basic Settings->Preferences->Group Paging RTP
Settings. For more information about setting this parameter, see “Group RTP Paging
(receives RTP streams)” on page 235.
Expansion Module Keys
11. Select from “Key 1” through “Key 36” (M670i)
or
Select from “Key 1” through “Key 60” (M675i)
12. In the "Type" field, select Paging.
13. (M675i) In the “Label” field, enter a label to apply to this key.
Notes:
1. When you select Paging for the “Type” field, the “Line” field is disabled.
2. The “Value” field allows for one multicast address entry only.
Notes:
1. When you select Paging for the “Type” field, the “Line” field is disabled.
2. The “Value” field allows for one multicast address entry only.