Additional Features
41-001522-00 REV00 – 04.2014 111
Status Scroll Delay
Using the Aastra Web UI, you can specify a scroll delay option that allows you to set the time delay, in seconds, between
the scrolling of each status message on the phone. You can specify this setting in the Status Scroll Delay (seconds) field
at the path Basic Settings > Preferences > General. The default time is 5 seconds for each message to display before scrolling
to the next message. You can increase or decrease this time as required. Setting and saving the value in the Aastra Web UI
applies to the phone immediately.
Configuring Status Scroll Delay
Aastra Web UI
1. Click on Basic Settings > Preferences > General.
2. Enter a value in the Status Scroll Delay (seconds) field. Valid values are: 1 to 25 seconds. Default is 5.
3. Click Save Settings.
To Next Page
Loading...
