121MD Evolution – Dialog 4425 IP Vision
Voice Mail Services
* z Dial “*” in order for your call to be transferred to the voice
mail.
Code “*” is the code used by default to consult a voice mail system
through an automated attendant. It may have been replaced by the
code “#”.
You are then connected to the voice mail system and are
prompted to dial the mailbox number you wish to access.
STATION NO z Dial your extension number, which is also your mailbox
number.
As with internal consultation, a system message prompts you to
enter your user password.
PASSWORD z Enter your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “Programming Your Extension’s Services”
section.
You are now connected to your mailbox’s consultation menu (see
details to follow).
Notes:
Interaction with the voice mail system or automated attend-
ant is carried out through the exchange of DTMF codes. For
an internal call, the transition to DTMF end-to-end dialling is
automatic. It is also the default from an external analogue
DTMF extension. From a GSM mobile phone, transition to
DTMF end-to-end dialling may necessitate a specific opera-
tion, depending on the type of GSM mobile phone involved.
The above method is also applicable for consulting your
voice mail from a third party set within your facility. Simply
begin by dialling the internal number – typically 885 – for the
automated attendant.
An alternative solution for accessing your mailbox from
outside your facility is dialling your DID number. If your
extension is effectively call forwarded to the voice mail
system, the rest of the procedure is identical to that
described.
To Next Page
Loading...
Need help?
General