Operations for Outgoing Calls
MD Evolution – Dialog 4425 IP Vision56
Operations for Outgoing Calls
Manually Dialling a Call
The first way to place internal and external calls is to manually dial
the number to be called. To do so:
u Lift the handset.
Your extension prompts you to dial the number for the party you
would like to reach.
NO TO CALL z Dial the number for the party to reach.
Call Press the dynamic function key shown on the left.
You can then follow the placing of your call on the handset and on
your extension’s screen where your called party’s identity is
displayed.
Or, for handsfree
mode:
NO TO CALL z Directly dial the number for the internal or external party to
contact, without lifting the handset.
Call Press the dynamic function key shown on the left.
You can then follow the placing of your call on the loudspeaker and
on your extension’s screen.
As the case may dictate, for an internal call:
STATION NO z Dial the internal extension number to contact.
Settings CallList PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
Enter number: _ 405
Erase Call
To Next Page
Loading...
