155MD Evolution – Dialog 4425 IP Vision
Physical Programming of Your Extension
Select Press the dynamic function key shown on the left, once the
feature you wish to program is framed.
You may then proceed with programming the selected feature. You
will be then prompted to validate your programming at each step
(see details to follow).
Once you have validated one or all of your setting(s), one of the
screens shown above will be re-displayed.
Then, to exit the physical programming of your extension:
Exit Press the dynamic function key shown on the left.
Your extension returns to the idle status.
Notes:
To exit the physical programming of your extension, you
may also press the centre navigation key on your extension
at any time.
The “Language” feature is not applicable within the framework
of your MD Evolution telephone system. The base language
for the various displays offered by your extension is auto-
matically set to the operating language for your system.
The “Log Off Restriction” feature is not used and therefore
not applicable within the framework of your MD Evolution
telephone system.
The “Option Unit” feature is reserved for a future use.
In all programming screens, the “Erase” function enables
you to erase the last digit entered, and the “Cancel” and
“Exit” functions enable you to exit the current programming
session without saving any changes.
CallList PhoneBook WAP Services
Log Off Restriction
Option Unit
Hearing Level
Network
Exit ÛÞ Select
To Next Page
Loading...
Need help?
General