Aastra Dialog 4425 IP Vision - Page 160

Physical Programming of Your Extension
MD Evolution – Dialog 4425 IP Vision160
A fine adjustment of your extension’s loudspeaker and handset can
be made directly on your extension – when not in programming
mode – when you are using either the handset or handsfree mode
for an ongoing call. Under these conditions:
ì Simply press either the + or - keys to increase or decrease
the listening volume.
The listening volume increases or decreases as you press the keys.
This adjustment is saved for all subsequent calls, until you adjust it
once again.
The selected level is also indicated by the icon shown on the left
when you have an ongoing call on your extension.
Adjusting the Date and Time Display
Format for Your Extension
Your extension continuously displays the date and time, according
to one of the formats provided. The time follows either the 12 or
24-hour format, and the date follows one of the various Latin or
Anglo-Saxon formats.
To set the time format displayed on your extension, after accessing
your extension’s physical programming mode and selecting the
“Time & Date” feature then framed:
CallList  PhoneBook WAP Services
Programmable Keys
Ring Character
Language
Display Contrast
Exit ÛÞ Select
Settings
Time & Date