Programming Your Extension’s Services
MD Evolution – Dialog 4425 IP Vision170
Your extension’s Call-Fwd key has now been pre-programmed.
The call forwarding that you have just programmed will however
only take effect when you press the Call-Fwd key. See the “Call
Forwarding Services” section.
Note: The Call-Fwd key programming menu also offers
you a sixth option: “6 – Cancel forward”. When necessary,
this other option allows you to delete what was previously
programmed on your extension’s Call-Fwd key.
Programming Your User Password
You will be prompted to enter your user password when accessing
certain services, most particularly:
• When you log on to your extension or a third party set.
• When placing one of your calls in substitution or with signature
from a third party set.
• When activating/deactivating a call forward of your extension
from a third party set (follow me service).
• When consulting or personalising your mailbox within your
facility’s integrated voice mail system, when applicable.
By default, your user password is “1234”. It is strongly recommended
that you change it to any other 4-digit code – possibly including the
* or # key – to ensure that use of the aforementioned services is as
secure as possible, and to preserve the confidentiality of your mailbox,
when applicable.
To change your password, after accessing your extension’s service
programming mode and selecting the “6 Update password” option:
Select Press the dynamic function key shown on the left.
The extension prompts you to enter your current user password,
and then your new user password.
PROGRAMMING
2 Call forward UNACTIVE
3 Appointment reminder UNACTIVE
4 Prefixes consultation
5 Cost consultation
Update password
Options ÛÞ Select
To Next Page
Loading...
Need help?
General