187MD Evolution – Dialog 4425 IP Vision
Services Reserved for Attendants
NIGHT NO z Dial the desired extension number for the night call forward.
To do so, use your extension’s keypad, holding each key down for
approximately 2 seconds, and, if necessary, using the “Erase”
option to cancel the last character entered.
This night call forward number may be an internal number. It may be
also an external number containing up to 18 digits, including the ad-
hoc network access prefix.
Þ Press the dynamic function key shown on the left in order to
have the “OK” option highlighted.
The dynamic option “Erase” becomes “Select”.
Select Press the dynamic function key shown on the left.
The purpose of this is to validate your entry, and then your extension
displays its acceptance of your service programming.
Select Press the dynamic function key shown on the left.
Your extension’s service programming welcome screen is
displayed once again, with the “UNACTIVE” status displayed to the
right of the “0 General calling” option.
Press and hold the centre navigation key on your extension
for 2 seconds.
Your extension returns to the idle status.
Your attendant position now no longer processes your facility’s
general calls.
This inactive general calls acceptance status is indicated on your
idle extension by the message “AT disabled” displayed on the first
line of your extension’s screen.
REPORT
The requested service is accepted:
Changing calling status is accepted
(NS REGISTERED)
BACK
Options Þ Select
Settings CallList PhoneBook WAP Services
AT disabled 01 15:49 07 Nov 2008
SMITH Peter
405
Log off 2 Missed
To Next Page
Loading...
Need help?
General