Start the Phone – Log On/Off
BusinessPhone – Dialog 4425 IP Vision22
Continued startup procedure
The display shows:
A timer counts down from 5 seconds. If no key is pressed during
this time,
(No change) is selected automatically.
Notes:
You can speed up the procedure by pressing
(No change).
The administrator mode is used to change the IP settings in
your phone. This mode is reserved for your system
administrator.
The display now indicates that the phone is connecting to the
server and the software is loading. This takes about 1 minute. After
a self test, the phone is ready for use or ready for log on. To log on,
see section “Log On” on page 24.
Settings CallList Contacts
User administrator mode to change IP settings
(x)
(No change)
To Next Page
Loading...
Need help?
General