Mailbox System
BusinessPhone – Dialog 4425 IP Vision60
Note: For daily use, it is recommended to ask your system
administrator to define the mailbox system as your pre-
programmed diversion address. Once this is defined, you
only have to dial *21# to activate your mailbox.
The system administrator can also define whether or not the
mailbox should be activated if you do not answer your
phone after a certain time or if your extension is busy.
Deactivate the Mailbox
#21# Press.
Verification tone.
í Press to finish the procedure.
New incoming calls will be signalled on your phone again.
Note The mailbox is still active if is defined as pre-
programmed diversion address for the feature Diversion
when there is no answer and Diversion when your extension
is busy.
To Next Page
Loading...
Need help?
General