Aastra OpenCom X320 - Page 125

Voice over IP (VoIP) SIP Telephony
123
– Softkeys (Aastra 6755i /6757i only): You can label this function keys on the
device display. You can switch between 4 layers of function keys using one of
the function keys on the device.
Click on the function key heading to call up the configuration dialogue for this
function key. Select a function in the Type setting and optionally enter a label
in the Labelling setting. Confirm the setting with Apply.
5. To transfer the settings to the Aastra 673xi/675xi, click the Apply button on the
Telephony : Devices: System phone page.
The Aastra 673xi/675xi restarts and thereby takes over the new configuration.
You can configure the following function keys for an Aastra 673xi/675xi.
Function keys for Aastra 6730i / 6731i and Aastra 6753i / 6755i / 6757i
Key type Parameter Function
empty – none
Speed dial Call number Direct dialling of a call number or code proce-
dure
BLF Call number Busy Lamp Field; LED indicator shows when
caller is busy
Ph.Book – Shows phone book managed by the
OpenCom 100 communications system
Answered Calls – Shows the list of missed calls which is man-
aged on the OpenCom 100 communications
system; LED indicates available calls
Answered Calls – Shows list of answered calls managed by the
OpenCom 100 communications system
Voice message – Shows the list of recorded voice messages;
LED indicates available messages
Voice box – Calls your voice box
Presence – Displays and changes your presence status
(“Messenger”)
Call forwarding – Shows the “call forwarding” menu; LED indica-
tor shows when call forwarding is active