Factory Settings on Delivery Internet Functions
22
The following important settings are active without further configuration:
■ External authorisation: International numbers can be dialled from all con-
figured terminals. External lines must be seized by entering a preset code.
■ Call forwarding to internal and external numbers can be activated. Call for-
warding after delay is performed after 20 seconds. Door calls and MSN groups
can be forwarded. Call diversions for other users and call diversions by other
users are deactivated.
■ The telephone lock can be activated. The terminal PIN is “0000”.
■ The white list, black list and call filters are not preconfigured and therefore not
active. If these lists are configured, they can be activated for user groups. A
special list of emergency phone numbers is preset and activated.
■ The door opener can be opened from all terminals. Door calls can be for-
warded.
■ Every standard user can change the configuration of OpenCom 100.
■ Every standard user can create a personal telephone book and edit entries in
the central telephone book.
■ Every standard user can read out the charges.
■ Applications requiring a licence (e.g. OpenCount) can be used after being acti-
vated.
■ RAS access is not allowed.
■ The multi-company version is not activated.
2.3 Internet Functions
■ RAS access (with or without callback) can be set up for every OpenCom 100
user. RAS access requires activation of the RAS authorisation.
■ More than one mail account query can be set up for every user.
To Next Page
Loading...
