Aastra OpenCom X320 - Installing Interface Cards; And Doorstation Equipment Slots

Installation Installing Interface Cards
30
the expansion module first and then plug in the plug-in
power supply.
3.7 Installing Interface Cards
The expansion module and the basic module of the OpenCom 130 resp. the main
module of the OpenCom 150 can be expanded using interface cards. The main
module of the OpenCom 131 is quipped with one large and two small slots for
installing interface cards.
Please note: Turn off the OpenCom 100. Unplug the plug-in power sup-
ply and (for an OpenCom 130 / 150) the main supply from
the socket. You must not install or uninstall interface cards
while the OpenCom 100 is turned on.
3.7.1 V.24 and Doorstation Equipment Slots
OpenCom 130: V.24 and doorstation equipment slots
OpenCom 131: V.24 and doorstation equipment slots
Doorstation
equipment
V. 24
Doorstation
equipment
V. 24