Voice over IP (VoIP) VoIP System Telephones
132
9.5.5 Local Configuration
In addition to automatic configuration via BOOTP/DHCP, it is possible to manually
configure an Aastra 6773ip (OpenPhone 73 IP) or an Aastra 6775ip
(OpenPhone 75 IP). This can make sense, for example, when you wish to connect a
VoIP system telephone at a distant location via router. This local configuration is
saved permanently in the non-volatile memory of the VoIP system telephone. To
change the local configuration, use an additional programme, the Java-based “IP
Phone Configurator”.
Note: Java programmes can be run on all common operat-
ing systems. To execute Java-based programmes, you must
install a suitable Java runtime environment on your operat-
ing system (JRE). This can be downloaded under the follow-
ing web address: http://www.java.com/.
1. The “IP Phone Configurator” can be started directly from the Product CD. Start
Windows Explorer. Navigate to the Product CD. Double-click the
“Aastra\IpPhoneConfigurator.jar” file.
To Next Page
Loading...
