Configuration
76
7. Configuration
Configuration and programming of the OpenCom 100 is performed by the Con-
figurator, a special software application integrated into the system. The Configu-
rator is operated via the Web console, which can be run on any PC connected to
the OpenCom 100.
The OpenCom 100 Web console (this screenshot: OpenCom 150)
Using the Web console, you can:
■ perform the initial configuration of the OpenCom 100,
■ configure users of the OpenCom 100 and authorise them to use certain system
services,
■ carry out further system maintenance,
■ use PC-supported telephony functions,
■ read out call charge information,
■ access the OpenCom 100 telephone book.
The Web console has an integrated online help function that offers compre-
hensive information on configuration and maintenance of the OpenCom 100 (see
Loading the Online Help starting on page 81).
Note: In order to use all the new system software functions,
we recommend that you download the latest software from
our Web site at http://www.aastra.de or
http://www.aastra.com.
To Next Page
Loading...
