Telephony Switch authorisation
175
If the terminal to be switched is currently in the call state, the authorisation
switch only takes place once the call is finished.
2. The next outgoing call on the switched terminal then is made with the
changed authorisations. If, e. g. the Immediate External line seizure option
was activated to do so, the external dialling tone is audible and an external call
can be made without entering a code.
If the next outgoing call is not made within 60 seconds, the authorisation
switch expires automatically.
At the end of the call ā when configured in this way ā you receive a brief message
regarding the call duration and the relevant charges incurred.
To Next Page
Loading...
