Technical Specifications
232
Note: The online help provides an overview of the limits
that should be observed when configuring the
OpenCom 100.
a/b ports
for analogue terminals with pulse or
DTMF dialling, flash duration of 60 to
310 ms
Possible interface cards:
–4 x a/b
–8 x a/b
–2 x S
0
and 6 x a/b
– Supply voltage 40 V ± 10%
– Supply power 1.2 VA
– Feed current 25 mA
– Range 1,000 m
V.24 port (COM)
for connection of a PC 1 x (optional)
–Range 3m
Doorstation equipment interface card
for connection of doorstation
equipment
1 x (optional)
Contact load of actor 1.5 A / 125 V
–Voltage range U
≈
= 5V…30V
Sensor Switched by low AC voltage
–Voltage range U
~
= 6 V…24 V
OpenCom 150 (Cont.)
To Next Page
Loading...
