31
Brightness Menu
To change the brightness on your P6U:
• Select the “Settings” icon (Fig. 3.1) in the Main Menu then choose “Brightness” (Fig. 3.2)
• Select the brightness you wish (Fig. 3.3)
Eco Mode/ Standard Mode/ Boost Mode
Fig. 3.1 Fig. 3.2 Fig. 3.3
“Boost mode” should only be used in low temperature, low altitude environments with adequate
clearance of exhaust/intake vents. A tripod is highly recommended. DO NOT block vents while
operating in Boost mode.
*For Wi Menu please see Page (20).
To Next Page
Loading...
