Do you have a question about the ABATEC Wave 1 and is the answer not in the manual?
Brand | ABATEC |
---|---|
Model | Wave 1 |
Category | Control Unit |
Language | English |
General information about the control unit's purpose and basic requirements for operation.
Explains how the control unit is prepared for and initiates operation after all installations are complete.
Defines the intended use of the heating control unit for sauna cabins and required accessories.
Summarizes the unit's function and provides instructions for cleaning the housing.
Lists the components included in the standard package for the control unit.
Details the control unit's interface, including thumbwheels and their illumination status.
Outlines the procedure for powering on and starting the sauna control unit by turning the lower thumbwheel.
Illustrates the various selectable modes for operating the sauna control unit.
Guides on how to adjust and set the target temperature using the unit's controls.
Explains the color-coded display for actual versus desired sauna temperatures.
Describes the automatic safety shutdown feature that switches off the unit after six hours of operation.
Details the thermal safety release mechanism that prevents overheating by shutting down the heater.
Explains error indications and provides a troubleshooting guide for common faults.
Step-by-step instructions for mounting the main control unit on the sauna cabin wall.
Guidelines for properly installing sensor lines, ensuring separation from power cables.
Details on mounting the temperature sensor and thermal safety release near the sauna heater.
Instructions for installing the sauna lighting system, considering placement and environmental factors.
Covers the final steps of connecting all components and routing cables to the power unit.
Provides a comprehensive overview of terminal assignments and connection diagrams for electrical hookups.
Specifies the technical characteristics of the control unit's power supply and associated components.