7.0.0 MANUFACTURER’S DECLARATION
ABATEC Electronic AG
Oberregauer Straße 48
A-4844 Regau
declares for the following products:
SAUNA CONTROL UNIT “WAVE1”
with base unit
to be in accordance with the following terms:
Low Voltage Directive 73/23
As amended by Council Directive 93/68/EWG new: 2006/95/EG
EMC Directive 89/336/EWG
new: 2004/108/EG
Applied harmonised standards:
Standard description:
1 EN 61000-6-3:2007
2 EN 61000-6-1:2007
3 EN 61000-3-2:2006
4 EN 61000-3-3 A2 2005
5 EN 60335-1:2006
6 EN 60335-2-53:2003
ABATEC Electronic AG
Friedrich Niederndorfer, CEO
Technical modifications, which are made for improvement, are subject to change. This instruction
manual was written to the best of our knowledge. Please inform your distributor, or us, if you still
detect errors.
Thank you!
ABATEC Electronic AG for:
27/42
INSTRUCTION MANUAL
To Next Page
Loading...