1.0.0 UNIT DESCRIPTION
1.1.0 GENERAL
The control unit is used exclusively for
controlling sauna cabins. For normal
operation, the base unit and the
temperature sensor with cable are required
besides the heater.
It is essential to follow the
installation instructions when
wiring the components!
1.2.0 OPERATIONAL MODE
The control unit is ready for operation, when
all installations have been completed.
By turning the lower thumbwheel, the sauna
control unit is started and the operational
mode can be selected (refer to section 2.0.0
“Sauna operation”).
sensor
To Next Page
Loading...
Need help?
General