ABB 2600T Series Operating Instruction

44 OI/266CXX/266JXX/HART-EN Rev. B | 266CRx, 266JRx, 266CSx, 266JSx
Easy Setup
Linearization Type
Linea
r
Next Edit
25. Use to call up edit mode.
26. Use or to select the desired transmission
function.
27. Confirm the selection with .
28. Go to the next menu item with .
Easy Setup
Lin./Rad. Point
Next Edit
29. Use to call up edit mode.
30. Use or to select the desired Lin./Rad. transition.
31. Confirm the selection with .
32. Go to the next menu item with .
Easy Setup
Low Flow Cut Of
f
0.0000%
Next Edit
33. Use to call up edit mode.
34. Use or to select the desired low flow cut off.
35. Confirm the selection with .
36. Go to the next menu item with .
Easy Setup
Damping
1.0000
Next Edit
37. Use to call up edit mode.
38. Use or to select the desired damping.
39. Confirm the selection with .
40. Go to the next menu item with .
Easy Setup
Set PV to Zero
Next OK
41. Use to call up edit mode.
42. Use to start automatic correction of the install
position.
43. Go to the next menu item with .
Easy Setup
Line 1 View
Pressure
Next Edit
44. Use to call up edit mode.
45. Use or to select the desired value for display in
the first line of the LCD display.
46. Confirm the selection with .
Change from two to one column

ABB 2600T Series Specifications

General

Brand	ABB
Model	2600T Series
Category	Transmitter
Language	English