42 OI/266CXX/266JXX/HART-EN Rev. B | 266CRx, 266JRx, 266CSx, 266JSx
Parameter name
12.3456 [unit]
Next OK
3. Use to selec
t the next decimal place to change.
4. Use or to set the desired value.
5. Use to select the next decimal place.
6. If necessary select and set additional decimal places in
accordance with steps 3 to 4.
7. Use to confirm the setting.
This concludes the procedure for changing a parameter value.
Alphanumeric entry
When an alphanumeric entry is made, a value is set by
entering the individual characters.
Menu name
Parameter name
Currently set value
Next Edit
1. Select the parameters you want to set in the menu.
2. Use to call up the parameter for editing. The currently
selected character will be shown highlighted.
Parameter name
BCDEFGHIJKLMOPQ
Next OK
3. Use to selec
t the character to be changed.
4. Use or select the desired character
5. Use to select the next character.
6. If necessary select and set additional characters in
accordance with steps 3 to 4.
7. Confirm the setting with .
This concludes the procedure for changing a parameter value.
To Next Page
Loading...
