ABB 266CSH - Page 48

48 OI/266CXX/266JXX/HART-EN Rev. B | 266CRx, 266JRx, 266CSx, 266JSx
MV Setup - open Tank MV-Calculation No Calculation
Flow
Level
Level Calculation
Level Unit Steam Drum Level
Open Tank
Closed Tank
Closed Tank, 2 Remote
Seals
Lower Level Dimension b from Fig. 33
Upper Level Dimension d from Fig. 33
Transm. mount. Pos. Dimension a from Fig. 33
Temperature Unit
Min. Temperature Minimum measuring medium temperature
Max. Temperature Maximum measuring medium temperature
Density Unit
Min. Temp. Density Density of the measuring medium at minimum temperature
Max. Temp. Density Density of the measuring medium at maximum temperature
Tank Temperature
Measurement
PT100
Sensor Temperature
Restore Last Parameter
Fig. 33: Diagram - “Level measurement - open tank”
H1 The lower fill level to be measured | H2 The higher fill level to be measured
1 Fill level | 2 Pressure transmitter | 3 Shutoff valve | 4 Impulse line