Need help?Do you have a question about the ABB 600T Series and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Series | 600T |
| Manufacturer | ABB |
| Type | Temperature Transmitter |
| Input | RTD, Thermocouple, mV |
| Output | 4-20 mA, HART |
| Power Supply | 10.5-55 V DC |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Enclosure Rating | IP66, NEMA 4X |
| Communication Protocol | HART |
| Certifications | ATEX, IECEx, FM, CSA |
Instruction that draws attention to the risk of injury or death.
Instruction that draws attention to the risk of damage to the product, process or surroundings.
Essential safety precautions for installation by trained personnel.
Installation in hazardous areas must follow relative standards (EN/IEC).
Ensure compliance with safety marking plate before electrical connections.
Requirement for engaging cover threads for flameproof enclosures.
Cable/conduit connection requirements for hazardous areas.
Cable suitability for high ambient temperatures in hazardous areas.
Warning regarding voltage drop when meter is removed in IS loops.
Details of ATEX Category 1 and 2 certifications for gas and dust.
ATEX certifications for explosionproof (Ex d) enclosures.
Explanation of IP67 rating for dust and water protection.
To Next Page