Need help?Do you have a question about the ABB XFCG4 6414 and is the answer not in the manual?
General| Product ID | XFCG4 6414 |
|---|---|
| ABB Type Designation | XFCG4 6414 |
| Category | Measuring Instruments |
| Model | XFCG4 |
| Manufacturer | ABB |
| Certifications | ATEX, IECEx |
| Type | Flowmeter |
| Accuracy | ±0.1% |
| Output Signal | 4-20 mA |
| Communication Protocol | HART, Modbus |
| Pressure Rating | Up to 100 bar (1450 psi) |
Details potential risks like gas leaks and electrical hazards during operation.
Configuration steps for enabling and setting up Ethernet communication.
Detailed instructions for replacing the main electronic board of the flow computer.
Procedure for replacing the External Integral Multi-Variable (XIMV) unit.
Guide for calibrating pressure sensors and RTD, ensuring accurate measurements.
Guide to interpreting LCD annunciators and alarm codes for problem diagnosis.
Steps to diagnose and resolve power-related issues affecting the flow computer.
Procedures for diagnosing and resolving communication problems with the unit.
To Next Page
