ABB 650 series - Back-Up Protection Functions; Control and Monitoring Functions

Central Account Management is an authentication infrastructure that offers a
secure solution for enforcing access control to IEDs and other systems within a
substation. This incorporates management of user accounts, roles and certificates
and the distribution of such, a procedure completely transparent to the user.
The Flexible Product Naming allows the customer to use an IED-vendor
independent IEC 61850 model of the IED. This customer model will be used as the
IEC 61850 data model, but all other aspects of the IED will remain unchanged
(e.g., names on the local HMI and names in the tools). This offers significant
flexibility to adapt the IED to the customers' system and standard solution.
GUID-F5776DD1-BD04-4872-BB89-A0412B4B5CC3 v1
The following tables list all the functions available in the IED.
Those functions that are not exposed to the user or do not need to
be configured are not described in this manual.
2.2 Back-up protection functions
GUID-A8D0852F-807F-4442-8730-E44808E194F0 v13
IEC 61850 or
function name
ANSI Function description Bay Control
REC650 (A02)
Multipurpose protection
CVGAPC General current and voltage protection 1
2.3 Control and monitoring functions
GUID-E3777F16-0B76-4157-A3BF-0B6B978863DE v15
IEC 61850 or
function name
ANSI Function description Bay control
REC650 (A02)
Control
SESRSYN 25 Synchrocheck, energizing check and synchronizing 1
APC10 Control functionality for a single bay, max 10 objects (1CB), including
interlocking
1
QCBAY Bay control 1
LOCREM Handling of LR-switch positions 1
LOCREMCTRL LHMI control of PSTO 1
SXCBR Circuit breaker 3
SLGAPC Logic rotating switch for function selection and LHMI presentation 15
Table continues on next page
Section 2 1MRK 511 423-UEN A
Application
24 Bay control REC650 2.2 IEC
Application manual