Operation Manual / A130-M.. - A145-M..
10 Taking out of operation at short notice / 10.5 Cover plate drawing
© Copyright 2021 ABB. All rights reserved. HZTL4031_EN Rev.N March 2021
10.5 Cover plate drawing
The cover plate is not included in the ABB scope of delivery and must be manufactured by
the operating company according to the following drawing.
Material: General structural steel, in accordance with DINEN10025-2.
Fig.70: Cover plate drawing
Product B1
± 0.5
B2 B3 B4
± 0.2
B5 B6 B7 ØD1
± 0.2
ØD2 R1 M
A130 65.7 60 130 11.7 1.4 150 35.7 227.7 17 ≤105 M8
A135 79.6 80 155 14.2 1.6 180 39.6 271.7 21 ≤125 M8
A140 98.2 102 190 17.2 2.0 220 48.2 332.5 25 ≤153 M10
A145 116.8 120 226 20.5 2.4 260 56.8 395.9 31 ≤182 M10
Table49: Cover plate dimensions [mm]
Page 124 / 149
To Next Page
Loading...
