ABB A130 - Fig. 26: Oil Orifice

Operation Manual / A130-M.. - A145-M..
4 Commissioning / 4.1 Oil supply
© Copyright 2021 ABB. All rights reserved. HZTL4031_EN Rev.N March 2021
4.1.5 Oil orifice in the bearing casing
Fig.26: Oil orifice
01 Bearing casing
02 Oil orifice
03 Circlip
With an oil inlet pressure of more than 3 bar of overpressure (with engine under load) up-
stream of the turbocharger, the bearing casings are equipped with an orifice at the oil inlet
as standard.
Page 45 / 149