NOTICE
The information in this document is subject to change without notice and should not be
construed as a commitment by ABB. ABB assumes no responsibility for any errors that
may appear in this document.
In no event shall ABB be liable for direct, indirect, special, incidental or consequential
damages of any nature or kind arising from the use of this document, nor shall ABB be
liable for incidental or consequential damages arising from use of any software or hard-
ware described in this document.
This document and parts thereof must not be reproduced or copied without written per-
mission from ABB, and the contents thereof must not be imparted to a third party nor used
for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license.
Copyright © 1999-2003 ABB
All rights reserved.
Release: March 2003
Document number: 3BSE 027 941 R301
TRADEMARKS
Registrations and trademarks used in this document include:
Industrial
IT
Registered trademark of ABB Ltd, Switzerland.
Control
IT
Registered trademark of ABB Ltd, Switzerland.
Operate
IT
Registered trademark of ABB Ltd, Switzerland.
CompactFlash Trademark of SanDisk Corporation, U.S.A.
Foundation Fieldbus Trademark of Fieldbus Foundation, U.S.A.
Modbus Trademark of Gould Electronics Inc., U.S.A.
PROFIBUS DP Registered Trademark of PROFIBUS International (P.I.).
INSUM Registered Trademark of ABB Schaltanlagentechnik GmbH,
Germany.
Siemens and all Siemens-products mentioned in this publication are trademarks
of Siemens AG, Germany.
To Next Page
Loading...
Need help?
General
