ABB ACH550 series - Page 56

54 E-Clipse Bypass Configurations for ACH550 Drives
Parameter Descriptions
Group 04
Code Name Resolution Range Default Description
0409 F1 E2 TIME 2, before 00:00:00 - 23:59:58 0 Time before last fault of 2nd last
event: hr:min:sec if time < 1 day
1, days
before
0 - 9999 days if time >= 1 day
0410 FAULT 2 1 3001 - 3999
See 'Faults' page
0 2nd to last fault
0411 F2 TIME 1 1, days ago 0 - 65535 0 Time since 2nd to last fault, days
0412 F2 TIME 2 2, ago 00:00:00 - 23:59:58 0 Time since 2nd to last fault,
hr:min:sec
0413 F2 VOLTAGE 1V 0 - 1200V 0 Input voltage at 2nd to last fault
0414 F2
CURRENT
0.1A 0.0 - 6553.5A 0 Motor current at 2nd to last fault
0415 F2 EVENT 1 — See parameter 501 0 Last event status before 2nd to
last fault
0416 F2 E1 TIME 2, before 00:00:00 - 23:59:58 0 Time before 2nd last fault of last
event: hr:min:sec if time < 1 day
1, days
before
0 - 9999 days if time >= 1 day
0417 F2 EVENT 2 — See parameter 501 0 2nd to last event before 2nd to
last fault
0418 F2 E2 TIME 2, before 00:00:00 - 23:59:58 0 Time before 2nd last fault of 2nd
last event: hr:min:sec if time < 1
day
1, days
before
0 - 9999 days if time >= 1 day
0419 FAULT 3 1 3001 - 3999
See 'Faults' page
0 3rd to last fault
0420 FAULT 4 1 3001 - 3999
See 'Faults' page
0 4th to last fault
0421 FAULT 5 1 3001 - 3999
See 'Faults' page
0 5th to last fault