228 ACH580 E-Clipse bypass and packaged drive user manual
Installation
Connection diagrams – Vertical Packaged Drive with input disconnect
ACH580 Vertical Packaged Drive units are configured for wiring access from the
bottom only. The following figures show the layout and wiring connection points.
Refer to the ACH580-01 Hardware Manual (3AXD50000044839) for control
connections to the drive. Maintain appropriate separation of control and power wires.
ACH580
Disconnect Switch
or Circuit Breaker
Motor
Ground Lug
Fuses
P1/P2
Input Power
Terminals
Drive
Input
Ground Lug
Motor
Terminals
(Px1-1, Px12-1, Px1-2, Px12-2)
To Next Page
Loading...
