ABB ACS355 - Page 21

Actual signals and parameters 21
USER S2
SAVE
User set2 will be saved. 2
USER S3
SAVE
User set3 will be saved. 3
USER S4
SAVE
User set4 will be saved. 4
USER S5
SAVE
User set5 will be saved. 5
USER S6
SAVE
User set6 will be saved. 6
20 LIMITS Drive operation limits.
Speed values are used in vector control and frequency
values are used in scalar control. The control mode is
selected by parameter 9904 MOTOR CTRL MODE.
2001 MINIMUM
SPEED
Defines the allowed minimum speed.
A positive (or zero) minimum speed value defines two
ranges, one positive and one negative.
A negative minimum speed value defines one speed range.
Note: Rotation direction can be fixed with parameter 1003
DIRECTION.
0rpm
-32000…
32000 rpm
Minimum speed 1 = 1 rpm
2002 MAXIMUM
SPEED
Defines the allowed maximum speed. See parameter 2001
MINIMUM SPEED.
E: 1500 rpm
/
U: 1800 rpm
0…32000 rpm Maximum speed 1 = 1 rpm
All parameters
No. Name/Value Description Def/FbEq
2002
2001
0
Speed
2001 value is < 0
2001 value is > 0
2002
2001
0
-(2001)
-(2002)
t
t
Allowed
speed range
Allowed
speed range
Allowed
speed range
Speed