ABB ACS560 - Torque control macro

DefaultUnitRange/ListNameIndex
Reset end user texts[1024]Reset all fieldbus set-
tings[32]
Done[0]
All to factory de-
faults[34560]
Clear all[62]Reset motor data[2]
Reset home view[512]Restore defaults[8]
Done[0]-Done[0], Save[1]Parameter save manually96.07
No action[0]-No action[0], Reboot[1]Control board boot96.08
n/a[0]-0...11User set status96.10
User2 backup[9]User3 IO active[6]Faulted[3]n/a[0]
User3 backup[10]User4 IO active[7]User1 IO active[4]Loading[1]
User4 backup[11]User1 backup[8]User2 IO active[5]Saving[2]
No action[0]-0...5, 18...21User set save/load96.11
Save to set 4[21]Save to set 1[18]Load set 2[3]No action[0]
Save to set 2[19]Load set 3[4]User set I/O
mode[1]
Save to set 3[20]Load set 4[5]Load set 1[2]
Not selected[0]-0...7, 18...20, 24...26User set I/O mode in196.12
Supervision
2[25]
Timed function
2[19]
DI5[6]DI2[3]Not selec-
ted[0]
Supervision
3[26]
Timed function
3[20]
DI6[7]DI3[4]Selected[1]
Other...Supervision
1[24]
Timed function
[18]
DI4[5]DI1[2]
Not selected[0]-See parameter 96.12
User set I/O mode in1
User set I/O mode in296.13
0b0000-0b0000…0b1111Unit selection96.16
122 Parameter listing
EN
HI