ABB ACS560 - Motor Data; Motor Control

frequently used parameters. For the complete parameter list, go to Parameter
settings .
Note: The content of the sub menus depend on the drive type.
Motor data
Values in this menu are based on the motor rating plate. See parameter group 98
User motor parameters .
Note: Values cannot be changed while drive is running.
1
2
3 4
5 6
7
8
9
1) Motor control mode1
2) Motor nominal power2
3) Motor nominal current3
4) Motor nominal voltage4
5) Motor nominal frequency5
6) Motor nominal speed6
7) Motor nominal torque7
8) Motor phase order - U V W, U W V8
9) Motor nominal Cos Φ9
Motor control
See parameter group 97 Motor control .
38 EN - Quick installation and start-up guide
EN
HI