ABB ACS560 - Page 124

DefaultUnitRange/ListNameIndex
1.5 kHz[1]-1.5 kHz[1.5], 2 kHz[2], 4
kHz[4], 8 kHz[8], 12
kz[12]
Minimum switching fre-
quency
97.02
Note: 1.5 kHz option is
available only in R0...R2
frames.
100%0…200Slip gain97.03
-2%-4…50Voltage reserve97.04
Disabled[0]-Disabled[0], Moder-
ate[1], Full[2]
Flux braking97.05
0.0%0.0...1600.0Optimizer minimum torque97.08
3.50%0.00 … 50.00IR compensation97.13
Linear[0]-Linear[0], Squared[20]U/F ratio97.20
Disabled[0]--UDC stabilizer97.48
Enabled strong[500]Enabled mild[100]Disabled[0]
Enabled max[800]Enabled medium[300]Enabled min[50]
0%0...200Slip gain for scalar97.49
80.0%1.0...200.0IR comp max frequency97.94
0.0V0.0...200.0UDC ripple97.135
98 User motor parameters
Not selected[0]-Not selected[0], Motor
parameters[1]
User motor model mode98.01
0.00000 p.up.u.0.00000…0.50000Rs user98.02
0.00000 p.up.u.0.00000…0.50000Rr user98.03
0.00000 p.up.u.0.00000…10.00000Lm user98.04
0.00000 p.up.u.0.00000…1.00000SigmaL user98.05
0.00000 ohmohm0.00000…100.00000Rs user SI98.09
0.00000 ohmohm0.00000…100.00000Rr user SI98.10
0.00 mHmH0.00…100000.00Lm user SI98.11
0.00 mHmH0.00…100000.00SigmaL user SI98.12
99 Motor data
124 Parameter listing
EN
HI