ABB ACS560 - Page 149

What to doCauseWarning/Aux
code (aux code
visible only on
assistant con-
trol panel and
drive composer)
Code
(hex)
Check the load.Overload occurred
between speed point 37.12
ULC speed table point 2
and 37.13 ULC speed table
point 3.
0002
Check the load.Overload occurred
between speed point 37.13
ULC speed table point 3
and 37.14 ULC speed table
point 4.
0003
Check the load.Overload occurred
between speed point
37.14 ULC speed table
point 4 and 37.15 ULC
speed table point 5.
0004
See parameter 37.04 ULC underload
actions.
User load curve: Signal has
been too long under the
underload curve.
ULC underload
warning
A8BF
Check the load.Underload occurred
between speed point 37.11
ULC speed table point 1
and 37.12 ULC speed table
point 2.
0001
Check the load.Underload occurred
between speed point 37.12
ULC speed table point 2
and 37.13 ULC speed table
point 3.
0002
Check the load.Underload occurred
between speed point 37.13
ULC speed table point 3
and 37.14 ULC speed table
point 4.
0003
Check the load.Underload occurred
between speed point
37.14 ULC speed table
point 4 and 37.15 ULC
speed table point 5.
0004
Diagnostics 149
EN
HI