ABB ACS560 - Page 293

/ ()(hex)
95.01A6A6
A6A7
96.02,96.100...96.102 A6B0
96.101 96.100 96.1001 A6B1
PLC PLC FBA A A6D1
12.15/12.25/AI A6E5
(XXXX ZZZZ). “ZZZZ”().ULC A6E6
(37.11…37.15) 0000
(37.21…37.35) (37.21…37.25) 
0002
0003
,A7A1
44 ()A7A5
I / O I/O A7AC
AFF5
-21.16 --AFF8
70.02 AFFE
,(:31.24 )A780
A783
Adjust the parameters used for the
motor overload function.
(35.51…35.53, 35.55, 35.56).
Check if parameter 95.26 enables the
use of a motor disconnect switch. If
not, check the following:
All three output phases are
disconnected from motor.
Motor disconnectA784
• All switches between drive and
motor are closed.
• All cables between drive and motor
are connected and secured.
If no issue was detected and drive
output was actually connected to
motor, contact ABB.
A791
A792
,,BR A793
 293
EN
HI