ABB ACS560 - Page 42

PID
PFC
PID
Jigar
T
CNTRL
10
1
2
4
3
7
6
5
8
SPFC
9
11
12
1
3
5
7
9
11
2
4
6
8
10
12
1) ABB standard (2-wire) - Default macro for general purpose.1
2) 3-wire macro - Suitable when the drive is controlled using momentary push
buttons.
2
3) ABB standard (vector) - Similar to standard macro but uses vector control.3
4) Motor potentiometer - Enables adjusting the motor speed using the two-push
buttons.
4
5) PID - Suitable for closed-loop control systems such as pressure control, flow
control, etc.
5
6) PFC - Pump and fan control logic for controlling multiple pumps or fans through
relay outputs of the drive.
6
7) Panel PID - Suitable for applications where drive is always controlled by PID and
the reference comes from an analog input AI1.
7
8) SPFC - Variant of PFC and can be used to generate a smaller pressure spike
when a new auxiliary motor is put into operation.
8
9) Pharma - Suitable for pharmaceutical applications.9
10) Plastic extrusion - Suitable for plastic extrusion application.10
11) Torque control - Similar to standard macro but uses torque control.11
12 Jigar - Suitable for Jigar machine operations.12
→
Displays the status of all I/O connections.
42 EN - Quick installation and start-up guide
EN
HI